

- Detect the sub-protocol for XE-1AJ (JPC mode) and XE-1AP (MD mode)
- Write a specific driver for the XE-1A (MD mode)
- Move the last buttons byte to the 1st and decode directions as digital
- ALGLIB.GTXE1AJD Shouldn't detect analog mode anymore. Just leave a note.



- Move to baselib:
 DEFINE MOUSELIB.GTPSGPORTSEL           JOYLIB.GTPSGPORTSEL
 DEFINE MOUSELIB._readJoyPort           JOYLIB._readJoyPort
 DEFINE MOUSELIB._flipPortOutput        JOYLIB._flipPortOutput


